Nasa's Curiosity Mars rover to scoop sand sample
"Rocknest": A patch of sand just downhill from a cluster of dark rocks is the site for the first scoop
The Curiosity rover is preparing to scoop its first sample of Martian soil.
The vehicle, which landed on the Red Planet in August, has
driven up to a pile of sandy material that mission scientists have
dubbed "Rocknest".This weekend, the robot will dig into the ground with its clamshell-shaped trowel, with the aim first of cleaning the mechanism of earthly contamination.
Later, it will repeat the task and deliver an aspirin-sized measure of sand to onboard labs for analysis.
Nasa engineers have cautioned that the whole process will be long and drawn out. The machinery involved is complex and the team says it needs time to learn how best to operate it.
Curiosity, also known as the Mars Science Laboratory (MSL), will very likely be stationary at Rocknest for a couple of weeks while the scoop tests are carried out.
Continue reading the main story
Curiosity - Mars Science Laboratory
- Mission goal is to determine whether Mars has ever had the conditions to support life
- Project costed at $2.5bn; will see initial surface operations lasting two Earth years
- Onboard plutonium generators will deliver heat and electricity for at least 14 years
- 75kg science payload more than 10 times as massive as those of earlier US Mars rovers
- Equipped with tools to brush and drill into rocks, to scoop up, sort and sieve samples
- Variety of analytical techniques to discern chemistry in rocks, soil and atmosphere
- Will try to make first definitive identification of organic (carbon rich) compounds
- Even carries a laser to zap rocks; beam will identify atomic elements in rocks
And, as with some of the earlier
science experiments conducted by the rover, the scoop results - when
they come - are expected to be fairly mundane. The sand is very probably
just the product of weathered basalt, the ubiquitous volcanic rock on
Mars' surface.
The team is more concerned about getting its sample handling procedures right than making significant new discoveries.A key objective of the first excavations will be to thoroughly clean the internal mechanisms of the robotic arm tool that does the digging.
It is called Chimra, or Collection and Handling for Interior Martian Rock Analysis.
Although assembled in ultra-sterile conditions at Nasa, this tool will still have acquired an oily film deposit in Earth air that would contaminate the rover's lab analysis results if left in place. By running several scoops through the handling system, Curiosity can scrub the film from Chimra.
"We effectively use it to rinse our mouth three times and then spit out," explained Daniel Limonadi, the Curiosity surface sampling phase lead at the US space agency's Jet Propulsion Laboratory (JPL).
"We will take a scoop bite, we will vibrate that sand on all the different surfaces inside Chimra to effectively sand blast those surfaces, and then we dump all that material out; and we rinse and repeat three times to finish cleaning everything out."
Once this procedure is complete, a tiny sample will be delivered to the onboard labs, Sam and CheMin, to run chemical and mineralogical analyses.
The sand will be severely shaken and sieved to make sure only fine-grained material, less than the width of a human hair in diameter, reaches the instruments.
A 40cm-wide Curiosity wheel track indicates the particle sizes in the sandy material at Rocknest
"Phoenix had a relatively uncontrolled drop off capability; they had just the one scoop and that scoop had to do everything," Mr Limonadi told BBC News.
"We use gravity and vibration to get things into little parts of Chimra that make very controlled volumes of portions for us to drop off."
The rover has now driven at total of 484m (of about 1,590ft) since its 6 August landing on the floor of Gale Crater, a huge depression on Mars' equator.
It still has about 176m to travel to get to a location dubbed Glenelg, a place satellite images have indicated is a junction between three different geological terrains.
It is at Glenelg where Curiosity will really get down to the business of investigating past environments in Gale.
Last week, scientists announced the robot had taken pictures of rocks that were clearly deposited in fast running water. The theory is that the rover is sitting at the head of an ancient alluvial fan where a network of streams cut across the crater floor billions of years ago.
- (A) Curiosity will trundle around its landing site looking for interesting rock features to study. Its top speed is about 4cm/s
- (B) This mission has 17 cameras. They will identify particular targets, and a laser will zap those rocks to probe their chemistry
- (C) If the signal is significant, Curiosity will swing over instruments on its arm for close-up investigation. These include a microscope
- (D) Samples drilled from rock, or scooped from the soil, can be delivered to two hi-tech analysis labs inside the rover body
- (E) The results are sent to Earth through antennas on the rover deck. Return commands tell the rover where it should drive next
ไม่มีความคิดเห็น:
แสดงความคิดเห็น